In the past, the most important effect in production was labor, but manual operation is not only inefficient, but also relatively expensive. With the development of technology, more and more new types of equipment have come out, and the appearance of mechanical equipment is artificial. After dealing with many problems, the production line was born under this background. Let's analyze the advantages of choosing a spunbond non-woven production line. The spunbond non-woven production line has been summarized by the planners for many years of practice and theory.

The air duct adopts a common slit-type overall drafting plan to ensure that the fiber web is evenly laid, the fiber fineness reaches about 3 denier, and the vertical and horizontal strength of the product is reached. Or go beyond national norms. Equipped with advanced touch screen control automatic tracking, over-temperature and over-pressure alarm system. The rolling mill adopts linear power, hard-tooth surface reduction box, high-stability universal joint drive, oil-cooled over-temperature and oil-short alarm system for bearings, and peripheral drilling technology on the roll surface to ensure the difference in overall temperature. The box design is advanced, and the fluid distribution is evenly distributed to ensure that the waste products are constantly spliced, not spliced, and no holes, thereby improving the qualification rate of the product. And the spunbond non-woven production line is relatively simple to operate, and the user is very easy to get started.